Some Studies on Flexible Polymer-Based Energy Harvesting Systems
- 1, St. Vincent Pallotti College of Engineering & Technology, India
The increasing demand for lightweight, flexible, wearable, and self-powered electronic systems has stimulated extensive research on polymer-based energy-harvesting materials. Conventional inorganic piezoelectric ceramics exhibit high electromechanical performance but are generally rigid, brittle and unsuitable for conformal or wearable applications. Flexible electroactive polymers, particularly poly(vinylidene fluoride) (PVDF) and poly(vinylidene fluoride-co-trifluoroethylene) [P(VDF-TrFE)], provide an attractive alternative because of their flexibility, low density, chemical stability, processability and inherent piezoelectric properties. Kawai (1969), [1], established the fundamental piezoelectric behavior of PVDF, initiating extensive research into electroactive polymeric materials. Subsequent developments have focused on increasing the electroactive β-phase, controlling molecular orientation, introducing nanofillers, engineering interfaces and designing hierarchical device structures.This paper presents a focused study of flexible polymer-based energy harvesting systems, emphasising piezoelectric, triboelectric and hybrid mechanisms. It discusses the influence of polymer phase structure, fabrication technique, nanofiller incorporation, ceramic–polymer interfaces, and device architecture. Representative systems based on ZnO/PVDF, graphene/PVDF, KNN/PVDF, BaTiO?/PVDF, BaTiO?/P(VDF-TrFE) and related composites demonstrate the potential of polymer-based materials for mechanical-energy conversion. Recent approaches involving electrospinning, surface engineering, interfacial modification, nanostructuring and hybrid piezoelectric–triboelectric operation are also examined. Finally, the major challenges related to output reproducibility, standardization, long-term stability, energy-storage integration and practical scalability are identified.
References
[1] Y. Kawai, “The piezoelectricity of poly(vinylidene fluoride),” Japanese Journal of Applied Physics, vol. 8, no. 7, pp. 975–976, 1969.
[2] Z. Yang, S. Zhou, J. Zu, and D. Inman, “High-performance piezoelectric energy harvesters and their applications,” Joule, vol. 2, no. 4, pp. 642–697, 2018, doi: 10.1016/j.joule.2018.03.011.
[3] L. Lu, W. Ding, J. Liu, and B. Yang, “Flexible PVDF based piezoelectric nanogenerators,” Nano Energy, vol. 78, Art. no. 105251, 2020, doi: 10.1016/j.nanoen.2020.105251.
[4] A. Salimi and A. A. Yousefi, “FTIR studies of beta-phase crystal formation in stretched PVDF films,” Polymer Testing, vol. 22, no. 6, pp. 699–704, 2003.
[5] S. Pi et al., “Flexible piezoelectric nanogenerator made of poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFE) thin film,” Nano Energy, vol. 7, pp. 33–41, 2014.
[6] C. Cho et al., “Enhanced energy harvesting based on surface morphology engineering of P(VDF-TrFE) film,” Nano Energy, vol. 16, pp. 524–532, 2015.
[7] S. Sukumaran, S. Chatbouri, D. Rouxel, E. Tisserand, F. Thiebaud, and T. B. Zineb, “Recent advances in flexible PVDF based piezoelectric polymer devices for energy harvesting applications,” Journal of Intelligent Material Systems and Structures, vol. 32, no. 7, 2021, doi: 10.1177/1045389X20966058.
[8] Z. L. Wang, “Triboelectric nanogenerators as new energy technology for self-powered systems and as active mechanical and chemical sensors,” ACS Nano, vol. 7, no. 11, pp. 9533–9557, 2013.
[9] H.-J. Yoon, H. Ryu, and S.-W. Kim, “Sustainable powering triboelectric nanogenerators: Approaches and the path towards efficient use,” Nano Energy, vol. 51, pp. 270–285, 2018, doi: 10.1016/j.nanoen.2018.06.075.
[10] H.-Y. Mi et al., “High-performance flexible triboelectric nanogenerator based on porous aerogels and electrospun nanofibers for energy harvesting and sensitive self-powered sensing,” Nano Energy, vol. 48, pp. 327–336, 2018, doi: 10.1016/j.nanoen.2018.03.050.
[11] H. H. Singh and N. Khare, “Flexible ZnO-PVDF/PTFE based piezo-tribo hybrid nanogenerator,” Nano Energy, vol. 51, pp. 216–222, 2018, doi: 10.1016/j.nanoen.2018.06.055.
[12] N. Ahbab, S. Naz, T.-B. Xu, and S. Zhang, “A comprehensive review of piezoelectric PVDF polymer fabrications and characteristics,” Micromachines, vol. 16, no. 4, Art. no. 386, 2025, doi: 10.3390/mi16040386.
[13] M. Mishra et al., “Advances in piezoelectric polymer composites for energy harvesting applications: A systematic review,” Macromolecular Materials and Engineering, vol. 304, Art. no. 1800463, 2019.
[14] M. M. Abolhasani, K. Shirvanimoghaddam, and M. Naebe, “PVDF/graphene composite nanofibers with enhanced piezoelectric performance for development of robust nanogenerators,” Composites Science and Technology, vol. 138, pp. 49–56, 2017, doi: 10.1016/j.compscitech.2016.11.017.
[15] K. Park et al., “Energy harvesting efficiency of piezoelectric polymer film with graphene and metal electrodes,” Scientific Reports, vol. 7, Art. no. 17290, 2017.
[16] E. Kabir, M. Khatun, L. Nasrin, M. J. Raihan, and M. Rahman, “Pure ?-phase formation in polyvinylidene fluoride (PVDF)-carbon nanotube composites,” Journal of Physics D: Applied Physics, vol. 50, Art. no. 163002, 2017.
[17] J. Choi et al., “Mechanical and electrical characterization of PVDF-ZnO hybrid structure for application to nanogenerator,” Nano Energy, vol. 33, pp. 462–468, 2017.
[18] A. Thakur et al., “Superior performances of in situ synthesized ZnO/PVDF thin film based self-poled piezoelectric nanogenerator and self-charged photo-power bank with high durability,” Nano Energy, vol. 44, pp. 456–467, 2018.
[19] S. Kang et al., “(Na,K)NbO? nanoparticle-embedded piezoelectric nanofiber composites for flexible nanogenerators,” Composites Science and Technology, vol. 111, pp. 1–8, 2015.
[20] S. Bairagi and M. Ali, “Poly(vinylidene fluoride) (PVDF)/potassium sodium niobate (KNN) nanorods based flexible nanocomposite film: Influence of KNN concentration in the performance of nanogenerator,” Organic Electronics, vol. 78, Art. no. 105547, 2020.
[21] S. Bairagi and M. Ali, “Flexible lead-free PVDF/SM-KNN electrospun nanocomposite based piezoelectric materials: Significant enhancement of energy harvesting efficiency of the nanogenerator,” Energy, vol. 198, Art. no. 117385, 2020.
[22] K. Verma and R. Sharma, “A flexible piezoelectric generator based on KNN/PVDF composite films: Role of KNN concentration on the piezoelectric performance of generator,” Chinese Journal of Physics, vol. 84, pp. 198–215, 2023, doi: 10.1016/j.cjph.2022.12.007.
[23] Y. Zhao et al., “High output piezoelectric nanocomposite generators composed of oriented BaTiO? NPs@PVDF,” Nano Energy, vol. 11, pp. 719–727, 2015.
[24] K. Shi et al., “Interface induced performance enhancement in flexible BaTiO?/PVDF-TrFE based piezoelectric nanogenerators,” Nano Energy, vol. 80, Art. no. 105515, 2021, doi: 10.1016/j.nanoen.2020.105515.
[25] J. Kim et al., “Scalable, flexible BaTiO?/PVDF piezocomposites prepared via supersonic spraying for use in energy harvesting and integrated energy storage devices,” Nano Energy, vol. 115, Art. no. 108682, 2023.
[26] Y. Fu et al., “Highly durable piezoelectric energy harvester based on a PVDF flexible nanocomposite filled with oriented BaTi?O? nanorods with high power density,” Nano Energy, vol. 52, pp. 391–401, 2018.
[27] S. Mirjalali, A. Mahdavi Varposhti, S. Abrishami, R. Bagherzadeh, M. Asadnia, S. Huang, S. Peng, C.-H. Wang, and S. Wu, “A review on wearable electrospun polymeric piezoelectric sensors and energy harvesters,” Macromolecular Materials and Engineering, vol. 308, no. 1, Art. no. 2200442, 2023, doi: 10.1002/mame.202200442.
[28] S. Ghosh and D. Mandal, “Synergistically enhanced piezoelectric output in highly aligned 1D polymer nanofibers integrated all-fiber nanogenerator for wearable nano-tactile sensor,” Nano Energy, vol. 53, pp. 245–257, 2018.
[29] V. S. Jella et al., “Enhanced output performance of a flexible piezoelectric energy harvester based on stable MAPbI?-PVDF composite films,” Nano Energy, vol. 53, pp. 46–56, 2018.
